Effect of graphene-oxide-modified osteon-like concentric microgrooved surface on the osteoclastic differentiation of macrophages / 华西口腔医学杂志

OBJECTIVES@#This study aimed to investigate the effect of new biomimetic micro/nano surfaces on the osteoclastic differentiation of RAW264.7 macrophages by simulating natural osteons for the design of concentric circular structures and modifying graphene oxide (GO).@*METHODS@#The groups were divided into smooth titanium surface group (SS), concentric microgrooved titanium surface group (CMS), and microgroove modified with GO group (GO-CMS). The physicochemical properties of the material surfaces were studied using scanning electron microscopy (SEM), contact-angle measurement, atomic force microscopy, X-ray photoelectron spectroscopy analysis, and Raman spectroscopy. The effect of the modified material surface on the cell biological behavior of RAW264.7 was investigated by cell-activity assay, SEM, and laser confocal microscopy. The effect on the osteoclastic differentiation of macrophages was investiga-ted by tartrate-resistant acid phosphatase (TRAP) immunofluorescence staining and quantitative real-time polymerase chain reaction (qRT-PCR) experiments.@*RESULTS@#Macrophages were arranged in concentric circles along the microgrooves, and after modification with GO, the oxygen-containing groups on the surface of the material increased and hydrophilicity increased. Osteoclasts in the GO-CMS group were small in size and number and had the lowest TRAP expression. Although it promoted the proliferation of macrophages in the GO-CMS group, the expression of osteoclastic differentiation-related genes was lower than that in the SS group, and the difference was statistically significant (P<0.05).@*CONCLUSIONS@#Concentric circular microgrooves restricted the fusion of osteoclasts and the formation of sealing zones. Osteomimetic concentric microgrooves modified with GO inhibited the osteoclastic differentiation of RAW 264.7 macrophages.

Analysis of incidence characteristics and trend of pneumoconiosis in Ningbo City from 1967 to 2019 / 中华劳动卫生职业病杂志

Objective: To understand the incidence of pneumoconiosis in Ningbo city from 1967 to 2019, and to analyze the distribution characteristics and change trend of pneumoconiosis. Methods: In February 2021, the data of pneumoconiosis patients in Ningbo city from 1967 to 2019 were sorted out. The data from 1967 to 1987 were from historical case files of Zhejiang Center for Disease Control and Prevention, the data from 1988 to 2005 were from the historical case files of Ningbo Center for Disease Control and Prevention, and the data from 2006 to 2019 were from the pneumoconiosis report card in China Disease Prevention and Control Information System; Followed up and supplement relevant information, including basic information, basic information of employers and information related to pneumoconiosis diagnosis, and comprehensively analyze the composition and development trend, population characteristics and industry characteristics of pneumoconiosis. Results: From 1967 to 2019, a total of 1715 cases of pneumoconiosis were reported in Ningbo City, including 1254 cases of stageⅠpneumoconiosis, 258 cases of stageⅡpneumoconiosis, 172 cases of stage Ⅲpneumoconiosis. 1202 cases of silicosis (70.09%) , 296 cases of asbestosis (17.26%) , 40 cases of welder's pneumoconiosis (2.33%) , 32 cases of graphite pneumoconiosis (1.87%) were reported. There were 1296 male cases (75.57%) and 419 female cases (24.43%) were reported. Silicosis (91.15%, 1102/1209) and welder's pneumoconiosis (100.00%, 40/40) were the most common pneumoconiosis in males, while asbestosis (90.24%, 268/297) and graphite pneumoconiosis (87.50%, 28/32) were the most common pneumoconiosis in females. The average age was (49.71±10.90) years old and the average length of service was (10.98±6.96) years. The top three reported pneumoconiosis cases were construction industry (336 cases, 19.59%) , ferrous metal smelting and rolling industry (317 cases, 18.48%) and non-metallic mineral products industry (315 cases, 18.37%) . The top three reported pneumoconiosis cases were 414 cases (24.14%) in Ninghai County, 294 cases (17.14%) in Yuyao City and 272 cases (15.86%) in Yinzhou District. Conclusion: With the development of industries in Ningbo City, government departments should strengthen supervision and management of enterprises involving silica dust and welding fume to curb the high incidence of pneumoconiosis.

Effects of in situ cross-linked graphene oxide-containing gelatin methacrylate anhydride hydrogel on wound vascularization of full-thickness skin defect in mice / 中华烧伤杂志

Objective: To prepare graphene oxide (GO)-containing gelatin methacrylate anhydride (GelMA) hydrogel and to investigate the effects of in situ photopolymerized GO-GelMA composite hydrogel in wound vascularization of full-thickness skin defect in mice. Methods: The experimental study method was used. The 50 μL of 0.2 mg/mL GO solution was evenly applied onto the conductive gel, and the structure and size of GO were observed under field emission scanning electron microscope after drying. Human skin fibroblasts (HSFs) were divided into 0 μg/mL GO (without GO solution, the same as below) group, 0.1 μg/mL GO group, 1.0 μg/mL GO group, 5.0 μg/mL GO group, and 10.0 μg/mL GO group treated with GO of the corresponding final mass concentration, and the absorbance value was detected using a microplate analyzer after 48 h of culture to reflect the proliferation activity of cells (n=6). HSFs and human umbilical vein vascular endothelial cells (HUVECs) were divided into 0 μg/mL GO group, 0.1 μg/mL GO group, 1.0 μg/mL GO group, and 5.0 μg/mL GO group treated with GO of the corresponding final mass concentration, and the migration rates of HSFs at 24 and 36 h after scratching (n=5) and HUVECs at 12 h after scratching (n=3) were detected by scratch test, and the level of vascular endothelial growth factor (VEGF) secreted by HSFs after 4, 6, and 8 h of culture was detected by enzyme-linked immunosorbent assay method (n=3). The prepared GO-GelMA composite hydrogels containing GO of the corresponding final mass concentration were set as 0 μg/mL GO composite hydrogel group, 0.1 μg/mL GO composite hydrogel group, 1.0 μg/mL GO composite hydrogel group, and 5.0 μg/mL GO composite hydrogel group to observe their properties before and after cross-linking, and to detect the release of GO after soaking with phosphate buffer solution for 3 and 7 d (n=3). The full-thickness skin defect wounds were made on the back of 16 6-week-old female C57BL/6 mice. The mice treated with in situ cross-linked GO-GelMA composite hydrogel containing GO of the corresponding final mass concentration were divided into 0 μg/mL GO composite hydrogel group, 0.1 μg/mL GO composite hydrogel group, 1.0 μg/mL GO composite hydrogel group, and 5.0 μg/mL GO composite hydrogel group according to the random number table, with 4 mice in each group. The general condition of wound was observed and the wound healing rate was calculated on 3, 7, and 14 d of treatment, the wound blood perfusion was detected by laser Doppler flowmetry on 3, 7, and 14 d of treatment and the mean perfusion unit (MPU) ratio was calculated, and the wound vascularization on 7 d of treatment was observed after hematoxylin-eosin staining and the vascular density was calculated (n=3). The wound tissue of mice in 0 μg/mL GO composite hydrogel group and 0.1 μg/mL GO composite hydrogel group on 7 d of treatment was collected to observe the relationship between the distribution of GO and neovascularization by hematoxylin-eosin staining (n=3) and the expression of VEGF by immunohistochemical staining. Data were statistically analyzed with analysis of variance for repeated measurement, one-way analysis of variance, and Tukey's method. Results: GO had a multilayered lamellar structure with the width of about 20 μm and the length of about 50 μm. The absorbance value of HSFs in 10.0 μg/mL GO group was significantly lower than that in 0 μg/mL GO group after 48 h of culture (q=7.64, P<0.01). At 24 h after scratching, the migration rates of HSFs were similar in the four groups (P>0.05); at 36 h after scratching, the migration rate of HSFs in 0.1 μg/mL GO group was significantly higher than that in 0 μg/mL GO group, 1.0 μg/mL GO group, and 5.0 μg/mL GO group (with q values of 7.48, 10.81, and 10.20, respectively, P<0.01). At 12 h after scratching, the migration rate of HUVECs in 0.1 μg/mL GO group was significantly higher than that in 0 μg/mL GO group, 1.0 μg/mL GO group, and 5.0 μg/mL GO group (with q values of 7.11, 8.99, and 14.92, respectively, P<0.01), and the migration rate of HUVECs in 5.0 μg/mL GO group was significantly lower than that in 0 μg/mL GO group and 1.0 μg/mL GO group (with q values of 7.81 and 5.33, respectively, P<0.05 or P<0.01 ). At 4 and 6 h of culture, the VEGF expressions of HSFs in the four groups were similar (P>0.05); at 8 h of culture, the VEGF expression of HSFs in 0.1 μg/mL GO group was significantly higher than that in 0 μg/mL GO group and 5.0 μg/mL GO group (with q values of 4.75 and 4.48, respectively, P<0.05). The GO-GelMA composite hydrogels in the four groups were all red liquid before cross-linking, which turned to light yellow gel after cross-linking, with no significant difference in fluidity. The GO in the GO-GelMA composite hydrogel of 0 μg/mL GO composite hydrogel group had no release of GO at all time points; the GO in the GO-GelMA composite hydrogels of the other 3 groups was partially released on 3 d of soaking, and all the GO was released on 7 d of soaking. From 3 to 14 d of treatment, the wounds of mice in the 4 groups were covered with hydrogel dressings, kept moist, and gradually healed. On 3, 7, and 14 d of treatment, the wound healing rates of mice in the four groups were similar (P>0.05). On 3 d of treatment, the MPU ratio of wound of mice in 0.1 μg/mL GO composite hydrogel group was significantly higher than that in 0 μg/mL GO composite hydrogel group, 1.0 μg/mL GO composite hydrogel group, and 5.0 μg/mL GO composite hydrogel group (with q values of 10.70, 11.83, and 10.65, respectively, P<0.05 or P<0.01). On 7 and 14 d of treatment, the MPU ratios of wound of mice in the four groups were similar (P>0.05). The MPU ratio of wound of mice in 0.1 μg/mL GO composite hydrogel group on 7 d of treatment was significantly lower than that on 3 d of treatment (q=14.38, P<0.05), and that on 14 d of treatment was significantly lower than that on 7 d of treatment (q=27.78, P<0.01). On 7 d of treatment, the neovascular density of wound of mice on 7 d of treatment was 120.7±4.1 per 200 times of visual field, which was significantly higher than 61.7±1.3, 77.7±10.2, and 99.0±7.9 per 200 times of visual field in 0 μg/mL GO composite hydrogel group, 1.0 μg/mL GO composite hydrogel group, and 5.0 μg/mL GO composite hydrogel group (with q values of 12.88, 7.79, and 6.70, respectively, P<0.01), and the neovascular density of wound of mice in 1.0 μg/mL GO composite hydrogel group and 5.0 μg/mL GO composite hydrogel group was significantly higher than that in 0 μg/mL GO composite hydrogel group (with q values of 5.10 and 6.19, respectively, P<0.05). On 7 d of treatment, cluster of new blood vessels in wound of mice in 0.1 μg/mL GO composite hydrogel group was significantly more than that in 0 μg/mL GO composite hydrogel group, and the new blood vessels were clustered near the GO; a large amount of VEGF was expressed in wound of mice in 0.1 μg/mL GO composite hydrogel group in the distribution area of GO and new blood vessels. Conclusions: GO with mass concentration lower than 10.0 μg/mL had no adverse effect on proliferation activity of HSFs, and GO of 0.1 μg/mL can promote the migration of HSFs and HUVECs, and can promote the secretion of VEGF in HSFs. In situ photopolymerized of GO-GelMA composite hydrogel dressing can promote the wound neovascularization of full-thickness skin defect in mice and increase wound blood perfusion in the early stage, with GO showing an enrichment effect on angiogenesis, and the mechanism may be related to the role of GO in promoting the secretion of VEGF by wound cells.

Biological and physico-mechanical properties of poly (methyl methacrylate) enriched with graphene oxide as a potential biomaterial / Propiedades físicas-mecánicas-biológicas del poli (metilmetacrilato) enriquecido con óxido de grafeno como potencial biomaterial

Objective: To determine the cytotoxicity and effects of graphene oxide (GO) on cellular proliferation of gingival-fibroblasts, pulp-dental cells and human osteoblasts in culture, and to determine the physical, mechanical and biological properties of poly (methyl methacrylate) (PMMA) enriched with GO. Material and Methods: The GO was characterized with SEM. Cytotoxicity and cell proliferation were determined by the MTT bioassay. The physical mechanical tests (flexural strength and elastic modulus) were carried out with a universal testing machine. Sorption and solubility were determined by weighing before and after drying and immersion in water. Porosity was evaluated by visual inspection. Data were analyzed with Student's t-test and Tukey's posthoc ANOVA. Results: The GO has a heterogeneous morphology and a particle size of 66.67±64.76 µm. GO has a slight to no-cytotoxicity (>50-75% viability) at 1-30 days, and at 24 hours incubation of PMMA with GO significantly stimulates osteoblasts (45±8%, p<0.01). The physical and mechanical properties of PMMA with GO increase considerably without altering sorption, solubility and porosity. Conclusion: GO alone or with PMMA has an acceptable biocompatibility, could contribute to cell proliferation, cell regeneration and improve the physical mechanical properties of PMMA.

Objective: To determine the cytotoxicity and effects of graphene oxide (GO) on cellular proliferation of gingival-fibroblasts, pulpdental cells and human osteoblasts in culture, and to determine the physical, mechanical and biological properties of poly (methyl methacrylate) (PMMA) enriched with GO. Material and Methods: T he G O w as c haracterized with SEM. Cytotoxicity and cell proliferation were determined by the MTT bioassay. The physical-mechanical tests (flexural strength and elastic modulus) were carried out with a universal testing machine. Sorption and solubility were determined by weighing before and after drying and immersion in water. Porosity was evaluated by visual inspection. Data were analyzed with Student's t-test and Tukey's post-hoc ANOVA. Results: The GO has a heterogeneous morphology and a particle size of 66.67±64.76 ?m. GO has a slight to no-cytotoxicity (>50-75% viability) at 1-30 days, and at 24 hours incubation of PMMA with GO significantly stimulates osteoblasts (45±8%, p<0.01). The physical and mechanical properties of PMMA with GO increase considerably without altering sorption, solubility and porosity. Conclusion: GO alone or with PMMA has an acceptable biocompatibility, could contribute to cell proliferation, cell regeneration and improve the physical-mechanical properties of PMMA.

TRANSFORMANDO MUROS: GRAFFITI COM ADOLESCENTES EM PRIVAÇÃO DE LIBERDADE / TRANSFORMING WALLS: GRAFFITI FOR TEENAGERS IN CONFLICT WITH THE LAW / MUROS TRANSFORMADORES: GRAFITI PARA ADOLESCENTES EN PRIVACIÓN DE LIBERTAD

Este estudo avalia uma intervenção de oficinas de graffiti, com adolescentes em cumprimento de medida socioeducativa de privação de liberdade em um Centro de Atendimento Socioeducativo de Florianópolis (SC). As oficinas visaram promover uma intervenção artística, espaço de expressão, fortalecimento de vínculos e formação ética-estética-política dos jovens. Foram realizados seis encontros com dois grupos (ala feminina e masculina) de 5 a 15 adolescentes (13 a 18 anos), bem como reuniões com a equipe técnica e os agentes socioeducativos. Posteriormente, foram conduzidos grupos focais com os participantes, sendo realizada análise de conteúdo temática e discussão com registros de diários de campo. Os resultados indicaram contribuição para o caráter socioeducativo da medida, coerente com o Estatuto da Criança e do Adolescente, pois houve opiniões positivas e protagonismo dos adolescentes, reflexões sobre ética e a dinâmica do Centro

This study evaluates an intervention of graffiti workshops with teenagers who had their liberty restricted by socio-educative measures inside a Socio-educative Center in Florianopolis (Brazil). The workshops attempted to promote an artistic intervention, a space for expression, strengthening the bonds and the ethicalesthetical-political growth of the teenagers. Six meetings were made with two groups (the female, and the male ward) with 5 to 15 teenagers (13 to 18 years old), as well as meetings with the technical team and the socio-educative agents. Afterwards, focal groups were conducted with the participants, with analysis of the subject theme and discussions with the field journey being made. The results pointed at contribution for the socio-educative character of the measure, coherent with the Brazilian code for the child and teenager, because there were positive opinions, the teenagers protagonism, as well as reflexions about ethics and the dynamics of the Center.

Este estudio evalúa la intervención de talleres de grafiti con adolescentes que cumplen con una medida socioeducativa de privación de libertad en un Centro de Servicios Socioeducativos de Florianópolis (Brasil). Los talleres tuvieron como objetivo promover una intervención artística, un espacio de expresión, fortalecer los lazos y la formación ética-estética-política de los jóvenes. Se llevaron a cabo seis reuniones con dos grupos (ala femenina y masculina) de 5 a 15 adolescentes (13 a 18 años), así como reuniones con el equipo técnico y los agentes socioeducativos. Posteriormente, se realizaron grupos focales con los participantes, con análisis de contenido temático y discusión con registros de diario de campo. Los resultados indicaron una contribución al carácter socioeducativo de la medida, de acuerdo con el Estatuto brasileño del Niño y el Adolescente, ya que hubo opiniones positivas, protagonismo de los adolescentes, reflexiones sobre la ética y la dinámica del Centro.

Removal of Shield Needles from Graphene Oxide Thrombus and Preparation / 中国医疗器械杂志

Atherosclerosis is a chronic inflammatory disease commonly seen in clinical practice. It can lead to thickening of vascular intima, occlusion of lumen stenosis and thrombosis, leading to angina pectoris, hypertension, myocardial infarction and other diseases, posing a serious threat to human life and health. This study provides a method for removing shield needles from graphene oxide thrombus and its preparation. The graphene oxide shield needle mainly includes flexible rotating shaft, radial flexible rod, rotating needle, adsorption main pipe and dosing main pipe, laser measuring device, high definition camera and other structures, which has the following advantages:firstly, it achieves multi-angle rotation grinding thrombosis, precise rotation grinding, avoids vascular damage and infection; secondly, thrombolytic drugs can be applied in the process of rotary grinding and small thrombus can be adsorbed to effectively avoid secondary embolization of blood vessels; thirdly, it a coating of graphene oxide on a rotating needle, which protects against bacteria and infection. This study has practical reference value for the development of thrombotherapy and the application of graphene in the medical field.

Effect of graphene oxide on the function of erythrocytes / 生物工程学报

The biocompatibility of nanomaterials has attracted much attention. Graphene oxide (GO) is a nanomaterial widely used in biomedicine, but its toxicity can not be ignored. In this study, the effect of GO on the blood system (the hemolysis rate, the fragility of erythrocyte, and acetylcholinesterase activity) was systematically investigated. The results showed that the hemolysis rate of erythrocytes was lower than 8% when the GO concentration was below 100 μg/mL (P5 μm (LGO) increased the activity of acetylcholinesterase by 42.67% (P<0.05). Then molecular dynamics simulation was used to study how GO interacted with acetylcholinesterase and increased its activity. The results showed that GO was attached to the cell membrane, thus may provide an electronegative environment that helps the hydrolysate to detach from the active sites more quickly so as to enhance the activity of acetylcholinesterase.

Study of capability of nanostructured zero-valent iron and graphene oxide for bioremoval of trinitrophenol from wastewater in a bubble column bioreactor

BACKGROUND: Bioremoval of phenolic compounds using fungi and bacteria has been studied extensively; nevertheless, trinitrophenol bioremediation using modified Oscillatoria cyanobacteria has been barely studied in the literature. RESULTS: Among the effective parameters of bioremediation, algal concentration (3.18 g·L−1 ), trinitrophenol concentration (1301 mg·L−1 ), and reaction time (3.75 d) were screened by statistical analysis. Oscillatoria cyanobacteria were modified by starch/nZVI and starch/graphene oxide in a bubble column bioreactor, and their bioremoval efficiency was investigated. Modifiers, namely, starch/zero-valent iron and starch/GO, increased trinitrophenol bioremoval efficiency by more than 10% and 12%, respectively, as compared to the use of Oscillatoria cyanobacteria alone. Conclusions: It was found that starch/nano zero-valent iron and starch/GO could be applied to improve the removal rate of phenolic compounds from the aqueous solution.

Inhibitory effect of reduced graphene oxide-silver nanocomposite on progression of artificial enamel caries

Abstract The use of antimicrobial agents is an efficient method to prevent dental caries. Also, nanometric antibacterial agents with wide antibacterial spectrum and strong antibacterial effects can be applied for prevention of dental caries. Objectives: The aim of this study was to evaluate the inhibitory effect of reduced graphene oxide-silver nanoparticles (rGO/Ag) composite on the progression of artificial enamel caries in a Streptococcus mutans biofilm model. Material and Methods: Enamel specimens from bovine incisors were divided into eight treatment groups (n = 13), as follows: group 1 was inoculated with S. mutans grown in Brain Heart Infusion containing 1% sucrose (1% BHIS), as negative control; groups 2-4 were inoculated with S. mutans grown in the presence of different rGO/Ag concentrations (0.08, 0.12, 0.16 mg/mL) + 1% BHIS; group 5-7 were inoculated with S. mutans grown in the presence of different agents (0.16 mg/mL reduced graphene oxide, 0.16 mg/mL silver nanoparticles, 10 ppm NaF) + 1% BHIS; group 8 was mixed with 1% BHIS, without inoculation. Artificial enamel carious lesions were produced by S. mutans biofilm model for 7 days. Confocal laser scanning microscopy and atomic force microscopy were used to analyze roughness and morphology of the enamel surface. Polarized light microscopy and confocal laser scanning microscopy were employed to measure the lesion depth and the relative optical density (ROD) of the demineralized layer. Results: Compared with the control groups, the rGO/Ag groups showed: (a) reduced enamel surface roughness; (b) much smoother and less eroded surfaces; (c) shallower lesion depth and less mineral loss. Conclusion: As a novel composite material, rGO/Ag can be a promising antibacterial agent for caries prevention.

Surface characteristics of pure titanium loaded graphene oxide: effect on bacteria adhesion and osteoblast structure / 华西口腔医学杂志

OBJECTIVE@#To evaluate the process characterization of graphene oxide loaded on pure titanium surface and effect on the biological properties of Staphylococcus aureus and osteoblasts.@*METHODS@#Graphene oxide at four concentrations (20, 50, 80, and 100 µg·mL⁻¹) was loaded on the pure titanium surface via electroplating, and the morphology, properties, and hydrophilic properties were measured with a field emission scanning electron microscope, micro Raman spectrometer, and contact angle tester, respectively. In addition, Staphylococcus aureus and osteoblasts were used as models and cultured with pure titanium-graphene oxide. Then, field-emission scanning electron microscopy and laser confocal microscopy were utilized to observe the changes in the amount of bacteria and osteoblast morphology and structure, respectively.@*RESULTS@#Graphene oxide at the four concentrations was successfully loaded on pure titanium surface via electroplating. It improved the hydrophilic properties of pure titanium surface, which benefitted the adhesion and growth of Staphylococcus aureus and changed the morphology and structure of the osteoblasts.@*CONCLUSIONS@#The pure titanium-graphene oxide composite has no antibacterial properties and has good biocompatibility.

A Case of Graphite Granuloma Mimicking Melanoma / 대한피부과학회지

No abstract available.

Brain Theranostics and Radiotheranostics: Exosomes and Graphenes In Vivo as Novel Brain Theranostics / 대한핵의학회잡지

Brain disease is one of the greatest threats to public health. Brain theranostics is recently taking shape, indicating the treatments of stroke, inflammatory brain disorders, psychiatric diseases, neurodevelopmental disease, and neurodegenerative disease. However, several factors, such as lack of endophenotype classification, blood-brain barrier (BBB), target determination, ignorance of biodistribution after administration, and complex intercellular communication between brain cells, make brain theranostics application difficult, especially when it comes to clinical application. So, a more thorough understanding of each aspect is needed. In this review, we focus on recent studies regarding the role of exosomes in intercellular communication of brain cells, therapeutic effect of graphene quantum dots, transcriptomics/epitranscriptomics approach for target selection, and in vitro/in vivo considerations.

Crystal Modification on Lithium Disilicate Glass Ceramics Sintered Using Microwaves / Modificación de Cristales de Cerémicas de Vidrio de Disilicato de Litio Sinterizadas con Microondas

ABSTRACT: Microwaves are an interesting alternative to process dental ceramics. It is well documented that Microwave Hybrid Sintering (MHS) allows important savings in time and energy consumption. However, little is known about its effect on lithium disilicate glass ceramics, a popular material in dentistry today. We analyzed the microstructure of lithium disilicate glass ceramics sintered with MHS compared with conventional sintering. We sintered lithium disilicate glass ceramics using MHS and conventional furnaces, and we analyzed the samples using X-Ray diffraction and SEM. Samples sintered with MHS showed an increased crystalline phase, with an increased number of crystals. These crystals have larger perimeters compared with samples sintered in conventional furnaces. MHS produced a different crystallization pattern and crystal/ matrix ration in lithium disilicate glass ceramics when compared to conventional sintering. This can be associated with the improved mechanical properties of these materials reported previously.

RESUMEN: Las microondas son una interesante alternativa para procesar cerámicas dentales. Está bien documentado que el Sinterizado Híbrido por Microondas (MHS) permite ahorros importantes de tiempo y energía. Sin embargo, poco se ha publicado respecto a sus efectos en cerámicas de disilicato de litio, un material bastante popular en odontología en estos días. En este artículo analizamos la micro estructura de cerámicas de disilicato de litio sinterizada con MHS comparada con el sinterizado convencional. Sinterizamos muestras de cerámicas de disilicato de litio usando MHS y hornos convencionales, y analizamos las muestras usando difracción de rayos X y SEM. Las muestras sintetizadas usando MHS tienen una mayor fase cristalina, con mayor número de cristales. Estos cristales tienen además perímetros mayores, comparados con las muestras sinterizadas en hornos convencionales. MHS produce patrones de cristalización y proporción de cristal/matrix diferentes a las producidos por sinterizado convencional. Esto puede asociarse a las mejoras en propiedades mecánicas reportadas previamente.

Pencil-core granuloma

Abstract: Pencil core granulomas are still infrequently reported in the literature. A 67-year-old woman presented with a 4mm hard blue subcutaneous nodule on the forehead. She remembered being injured with a pencil tip about 60 years before. The subcutaneous nodule was excised, which microscopically revealed a foreign body reaction with histiocytes containing fragmented coarse black particles. We diagnosed pencil-core granuloma based on the patient's history of pencil tip injury and histological examination findings.

Radio-graphene in Theranostic Perspectives / 대한핵의학회잡지

Owing to its unique physicochemical properties such as high surface area, notable biocompatibility, robust mechanical strength, high thermal conductivity, and ease of functionalization, 2D-layered graphene has received tremendous attention as a futuristic nanomaterial and its-associated research has been rapidly evolving in a variety of fields.With the remarkable advances of graphene especially in the biomedical realm, in vivo evaluation techniques to examine in vivo behavior of graphene are largely demanded under the hope of clinical translation. Many different types of drugs such as the antisense oligomer and chemotherapeutics require optimal delivery conveyor and graphene is now recognized as a suitable candidate due to its simple and high drug loading property. Termed as ‘ radio-graphene’, radioisotope-labeled graphene approach was recently harnessed in the realm of biomedicine including cancer diagnosis and therapy, contributing to the acquisition of in vivo information for targeted drug delivery. In this review, we highlight current examples for bioapplication of radiolabeled graphene with brief perspectives on future strategies in its extensive bio- or clinical applications.

Graphene as an Enabling Strategy for Dental Implant and Tissue Regeneration

Graphene-based approaches have been influential in the design and manipulation of dental implants and tissue regeneration to overcome the problems associated with traditional titanium-based dental implants, such as their low biological affinity. Here, we describe the current progress of graphene-based platforms, which have contributed to major advances for improving cellular functions in in vitro and in vivo applications of dental implants. We also present opinions on the principal challenges and future prospects for new graphene-based platforms for the development of advanced graphene dental implants and tissue regeneration.

The effects of graphene quantum dots on hematopoietic system in rats / 中国应用生理学杂志

<p><b>OBJECTIVE</b>To study the effects of graphene quantum dots (GQDs) on hematopoietic system in rats.</p><p><b>METHODS</b>Thirty male SD rats were randomly divided into three groups (n = 10): control group, high dose group (10 mg/kg · d), low dose group (5 mg/kg · d), The rats in experimental group were intravenous injected with GQDs for 28 days and those in control group were injected with normal saline at the same volume. Routine blood and the function of liver and kidney were detected by instrument analysis. The cycle and apoptosis of bone marrow mononuclear cells (BMCs) were detected by FCM. The other three only healthy male SD rat bone marrow mononuclear cells (BMCs) were cultured by joining GQDs for 24 h, 48 h,72 h in vitro, the proliferation was assayed by CCK-8, the content of granulocyte macrophage colony stimulating factor (GM-CSF) from cultural supernatants were detected by ELISA.</p><p><b>RESULTS</b>The amount of red blood cell and concentration of hemoglobin from experimental group were increased significantly compared with those of control groups (P < 0.05), the concentration of triglyceride and high density lipoprotein were decreased. DNA synthesis period was prolonged (P < 0.01), there was no significant difference in apoptosis. BMCs were promoted proliferation clearly after using GQDs for 72 h (P < 0.05). The content of GM-CSF was increased (P < 0.01) .</p><p><b>CONCLUSION</b>GQDs may promote hematopoietic function in rats.</p>

Effect of Nd:YAG laser irradiation on the number of open dentinal tubules and their diameter with and without smear of graphite: an in vitro study

Dentin hypersensitivity [DH] is characterized by tooth pain arising from exposure of dental roots. In this study the efficiency of neodymium yttrium-aluminum-garnet [Nd:YAG] laser in association with graphite on dentinal surface changes as the alternative to the treatment of DH was evaluated. Sixteen noncarious human third molars were collected and sectioned into 5 parts from cementoenamel junction [CEJ] to the furcation area. The prepared samples were randomly assigned into five groups [Gs] of each 16: Control [G1], treated by Nd:YAG laser at 0.5 W [G2], irradiation of Nd:YAG with a 0.25 W output power[G3], smeared with graphite and then using Nd:YAG laser at output powers of 0.5 W [G4] and 0.25 W [G5]. For all groups the parameters were 15 Hz, 60 s, at two stages and with a right angle irradiation. The number and diameter of dentinal tubules [DT] were compared and analyzed by SPSS software, One way ANOVA and Post hoc LSD tests. The number of open dentinal tubules varied significantly between all groups except among G1 with G3 and G2 with G5. Multiple comparison tests also exhibited significant differences regarding the diameter of tubules between the groups two by two except among G2 with G5. Nd:YAG laser used at 0.25 W and 0.5 W with application of graphite smear was able to reduce the number and diameter of dentinal tubules

Amperometric determination of ascorbic acid in pharmaceutical formulations by a reduced graphene oxide-cobalt hexacyanoferrate nanocomposite

Investigation of the redox properties of drugs and their determination are performed by electrochemical techniques. Data obtained from electrochemical techniques are often correlated with molecular structure and pharmacological activity of drugs. In this regard, different modified electrodes were applied as sensors for quantification of different drugs. A nanocomposite of reduced graphene oxide-cobalt hexacyanoferrate was synthesized by a simple precipitation route. Scanning electron microscopy revealed that the nanocomposite comprised nanoparticles of cobalt hexacyanoferrate attached to the reduced graphene oxide nanosheets. A nanocomposite-modified carbon paste electrode was then fabricated. It represented prominent activity toward the electrocatalytic oxidation of ascorbic acid, and the kinetics of the electrooxidation process was evaluated. Finally, an amperometric method was developed for the quantification of ascorbic acid in different pharmaceutical formulations

Voltammetric behavior and determination of trace amounts of omeprazole using an edge-plane pyrolytic graphite electrode

The voltammetric performance of edge-plane pyrolytic graphite [EPG] electrode via adsorptive stripping voltammetry was investigated for study of the electrochemical behavior of omeprazole [OMZ] in aqueous solution. The results revealed that the oxidation of OMZ is an irreversible pH-dependent process that proceeds with the transfer of one electron and one proton in an adsorption-controlled mechanism. The determination conditions, such as the pH values of the supporting electrolyte, accumulation time and scan rate were optimized. Simplicity, high reproducibility and low detection limit [3 nM] of the electrode response as well as wide linear range [0.01 to 4.0 microM] can be stated as significant features of this electrode. The EPG electrode was successfully applied for the determination of OMZ in pharmaceutical formulations and satisfactory results were obtained